BENDIX TCH-010-004 Uživatelský manuál stáhnout pdf

Technical Bulletin

Bulletin No.: PRO-10-04 Effective Date: 12/2/85 Cancels: N/A Page: 1 of 1

Subject: Cruise Control Stationary Throttle Mode

Stationary throttle control was incorporated in the truck cruise control system to permit a

rough setting of engine speed to aid in the warm-up process. Like the mechanical hand

throttle it replaces, the system sets engine speed by positioning the throttle lever. In the

stationary throttle control mode the system sets engine speed by incrementally

repositioning the throttle lever each time the “RESUME” switch is activated. The system

does not monitor engine RPM and, therefore, precise engine speeds cannot be set or

maintained.

This is particularly true in the case of varying engine loads as would be encountered

when accessory equipment such as the P.T.O. or air conditioning cycles on and off. It

should also be noted that due to the sensitivity of some engine governors, throttle

positioning is not an effective method of controlling engine speed even in a no load

condition.

In all cases the vehicle should not be left unattended for long periods of time while the

stationary throttle control is in use.

Operation of the Bendix cruise control system including the stationary throttle control is

covered in the Operational Handbook (BW-1331) packaged with all retrofit kits.

Technical BulletinBulletin No.: PRO-10-04 Effective Date: 12/2/85 Cancels: N/A Page: 1 of 1Subject: Cruise Control Stationary Throttle ModeStationary

Žádné komentáře

BENDIX TCH-010-004 Uživatelský manuál