BENDIX M-21-M-22 ANTILOCK MOD ASSY Specifikace stáhnout pdf (Strana 88)

8 Appendix I

Meritor WABCO Maintenance Manual MM-0112 (Revised 05-13)

8 Appendix I

Reconfiguration Procedure

How to Reconfigure an ECU (E Version)

E version ECUs will automatically learn and memorize the following

components if they are connected at start up:

앫 ATC valve

앫 Retarder relay or third brake relay

앫 Datalink SAE J1939

앫 Auxiliary inputs and outputs 1-5

NOTE: Depending on the ECU configuration (RSC, ESC or HSA), ATC

Valve and auxiliary 1 through 5 cannot be reconfigured to remove

these components. Only the retarder relay is memorized or cleared.

Once these components have been memorized, the ECU will look for

them at each start up. If a memorized component is not present, the

ECU will record a fault. For example, if an ATC valve is memorized,

but is not present at the next start up, the ECU records a fault. This

can occur if an ECU is moved from one truck to another and one or

more of the memorized components are not available on the new

truck. If this occurs, use TOOLBOX™ Software to reconfigure the

ECU. If you do not have TOOLBOX™ Software, follow the manual

reconfiguration instructions in this section.

TOOLBOX™ Software

NOTE: For complete instructions for using TOOLBOX™ Software,

refer to the TOOLBOX™ User’s Manual, TP-99102.

To reconfigure the ECU with TOOLBOX™ Software, use the Reset

Memorized command.

Select Reset Memorized from the pull-down menu to tell the ECU

to reset the memorized or “learned” components. Figure 8.1. If you

are using TOOLBOX™ Software version 11 or higher, choose

Components, Memorized Components and Reset Memorized.

Figure 8.2 and Figure 8.3.

Figure 8.1

Figure 8.2

Figure 8.3

Before reconfiguring the ECU, contact the Meritor WABCO OnTrac

Customer Service Center at 866-668-7221 for additional

information.

Figure 8.1

Figure 8.2

Figure 8.3

4010669a

4010670a

4010671a

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 97 98

Komentáře k této Příručce

Žádné komentáře

BENDIX M-21-M-22 ANTILOCK MOD ASSY Specifikace Strana 88

Komentáře k této Příručce

Související produkty a manuály pro Modulátor BENDIX M-21-M-22 ANTILOCK MOD ASSY