BENDIX BW7273 Uživatelský manuál Strana 27

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 32
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 26
26
Replacing Spring Brake Chamber
WARNING: Follow the Safety Instructions. The vehicle
manufacturer's instructions must also be followed.
Activate the spring caging mechanism of the spring brake
chamber so that the spring is held in it compressed position.
See vehicle manufacturer's instructions.
Apply the parking brake.
1. Remove the air hose connectors of the service and parking
brake.
2. Remove the two (2) nuts holding the spring brake chamber.
3. Remove spring brake chamber.
4. Check through the aperture in the brake chamber attachment
ange that no moisture/corrosion is present. If so, replace
caliper.
Removing Spring Brake Chamber
!
5. Lubricate the end of the push rod with grease.
Zobrazit stránku 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Komentáře k této Příručce

Žádné komentáře