BENDIX GEN 4 GEN 5 ABS Návod k obsluze stáhnout pdf (Strana 93)

Using the Gen 4 & 5 Diagnostic Options

NEXIQ Brake-Link™ Bendix

& Eaton

ABS Applications 87

3 Brake-Link™ presents the

Gen 4/5 Diagnostic

Options

menu; use the

and keys to scroll to

TESTS

and press .

4 Brake-Link™ displays the

Tests Menu

; use the and keys to

position the cursor on

TEST WARNING LAMP

and press .

Note:

If wheel speeds are greater than 5 kph, Brake-Link™ dis-

plays a message indicating that the test cannot be performed.

5 Brake-Link™ blinks the lamp 4 times; while performing the test, it dis-

plays the following message.

Once it finishes the test, it displays TEST IS COMPLETED. Press

to return to the

Tests Menu

6 Press to return to the main menu or to return to the

Select Application

screen.

Self-Configuration

Generation 4 and 5 controllers can auto-detect ABS components and automat-

ically adjust the current configuration. Use Brake-Link™ to initiate this proce-

dure.

Initiate procedure via menu navigation.

ECU INFORMATION

FAULTS

DATA LIST

TESTS

ACTIVATING

WARNING LAMP

ON AND OFF...

The ECU must recognize all ABS components. To avoid improper re-

configuration and/or damaging the ECU, be sure all system peripherals

(i.e., modulators, sensors, etc.) are properly installed/connected before

initiating self-configuration.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 111 112

Komentáře k této Příručce

Žádné komentáře

BENDIX GEN 4 GEN 5 ABS Návod k obsluze Strana 93

Komentáře k této Příručce

Související produkty a manuály pro Modulátor BENDIX GEN 4 GEN 5 ABS